• Ultrasonic
  Cleaner
• Digital
  Scales
• Norlake
  Refrigeration
• HPLC
  Flowmeter
• Moisture
  Analyzer
• Laboratory
  Equipment

Your Lab Just Found The Perfect Ultrasonic Cleaner

Elma SRH 4/200 sieve rotation holder - Clean four sieves simultaneously. Designed to make sieve cleaning easy!

Elma SRH 4/200 Rotates Sieves During Ultrasonic Cleaning

A Better Way to Clean Sieves

• Rapid thorough cleaning
• Fits 200 mm diameter sieves
• Simple to operate
• Clean four sieves simultaneously

Top Ultrasonic Cleaning & Control

• More power = faster cleaning
• Autodegas and Autostart enable reproducible processes
• Continuous display of time and temp, set and actual

Ultrasonic cleaning is the most effective way to remove contaminants from the small crevices in analytical sieves. However, the standard 200 mm diameter sieves are too large for most ultrasonic baths. Even when they do fit, the cleaning process is not equally effective on every part of the sieve. Now there’s a unique and simple solution, the Elma SRH 4/200 sieve rotation holder.

TS-540 Ultrasonic Test Sieve Cleaner

• Cleans one sieve at a time
• Accepts standard 8-inch, 200mm diameter sieves
• Includes Stainless steel tank and cover
• Capacity 6 litres, 1.5 gallons
• Sieve holder included
• Features Built-in timer
• 100-120V model (220-230V also available)

Ultrasonic Sieve Cleaner, with Rotation Holder

• Holds and rotates 4 sieves at one time
• Accomodates 8-inch or 200mm diameter sieves
• Stainless steel tank with drain and cover
• Capacity 28 litres, 7.5 gallons
• Built-in timer and heater
• 100-120V model (220-230V also available)

Fast and thorough
The combination of an Elma ultrasonic bath with the SRH 4/200 rotation holder results in a thorough intensive cleaning of analytical sieves. Cleaning is both faster and more thorough than without rotation. Save time and money.

Holds four sieves
Up to four 200 mm diameter sieves can be cleaned simultaneously. The SRH 4/200 accepts sieves from any manufacturer. The sieve rotation holder fits in Elmasonic S 300/H and S 450/H ultrasonic cleaners. The Elmasonic S 900/H tank can fit two rotational holders, cleaning eight sieves per load.

Simple
The sieve rotation holder is simple to operate. No installation is required. Just place the sieve rotation holder into the ultrasonic bath and go. The SRH 4/200 is made from hygienic and easy to clean stainless steel.

Effective cleaning
The sieves rest in a tilted position enabling thorough and even cleaning. Dirt and contaminants collect on the bottom of the tank, not in other sieves.

Gentle
Ultrasonic cleaning is tough on dirt, but gentle on sieves. There is no damage to the sieves; web tension and mesh size are not affected.

Applications
For all laboratories fractionating fine particles with 200 mm diameter sieves, the Elma SRH 4/200 is indispensable. The Elma sieve cleaners are perfect for paint, powder, soil, food analysis, rocks, aggregates, sand, grain, or any particle size. Sieves can be ASTM standard made from brass, steel, ceramic and can be of any mesh size.

Made by Elma Germany
The name Elma has represented quality and know-how in ultrasonic cleaner technology for 50 years. Elma ultrasonic cleaner units are designed and manufactured in Germany to the highest standards of excellence. The Elma product range for ultrasonic cleaning is the largest worldwide, for both standard and special cleaning lines. Long term experience, innovative development, and a drive for perfection are reflected in every Elma product.

Back to Top

• Sample Sonication Demonstrates Ultrasonic Cleaner Utility

  The ultrasonic cleaner is an effective and convenient lab apparatus. But it’s a lot more than a cleaner. The same sound-wave-induced cavitation bubble creation and collapse — and the resultant pressure jets — also have many other uses. One of those uses is to disperse colloids with sonication. Why would you want to do that?

• If You Must Mutilate Yourself, At Least You Can Do It Hygienically

  I think I’ve mentioned before that tattoos are something I just don’t understand. I mean, any business that has to have late evening hours on weekends just so they can get customers when they’re drunk enough to decide to mutilate themselves just seems inherently questionable. But if you are going to get wasted and let

• Cleaning: Analysis, Performance, and Quantification

  Surface properties are the most critical factor in determining a material’s interactions with the world. Whether you’re a tree, a person, or a hunk of metal, your interactions are mediated through your surface. And if you happen to be a metal, you might be concerned with such things as how well you can mate with

• No Room for Error in Electron Microscopy Sample Preparation

  The National Center for Electron Microscopy is “”a forefront research center for electron-optical characterization of materials with state-of-the-art instrumentation and expertise.”” Obviously, they need to integrate the latest electron-imaging technology to maintain that status. Not quite as obviously, they also need to incorporate the best sample preparation apparatus and processes as well. After all, they’re

• Step-By-Step Procedures Ensure Standardization

  When you want different labs to provide comparable testing services, you need to develop standard operating procedures.  An example is provided in the Environmental Protection Agency’s “Standard Operating Procedure for Tuberculocidal Activity of Disinfectants: In vitro Test for Determining Tuberculocidal Activity.”  Such procedures are step-by-step explanations for how to perform a specific laboratory analysis.  If