Aurius Spectophotometers Have a Wide Variety of Sampling Options

Cells And Flowcells

As well as 10mm cells and flowcells, holders are available for rectangular and cylindrical cells up to 100mm pathlength. A holder for solid samples is also available.

Automatic Cell Changers

Automatic changers are available for 4, 6 or 8 cells, providing rapid sample changing or full programming.

Sipette Sampling

Samples down to 300 microlitres may be measured in a 10mm cell. Sampling is under control of the instruments microprocessor system. Samples may be saved or pumped to waste.

Micro Sampling

Small or valuable samples down to 50 microlitres or less may be measured using a specially designed cell and holder.

Ultra-Micro Sampling

A special precision cell holder is available for ultra-microcells using as little as 5 or 10µl of valuable samples. Samples are loaded into the cell by pipette.

Sample Temperature Control

Water and thermoelectric temperature control is available for single cells and automatic cell changers. Temperature is set from the control panel and displayed on the screen.

Temperature Programming

Temperature programming of samples using a single cell or 4 cell changer is possible using a Thermoelectric controller with a range of 10°-100°C producing temperature programmes at up to 1°C per minute.

Batch Sampling

Automatic batch sampling for up to 100 samples is available. The pump fits within the sample compartment and volume etc is set from the control panel and displayed on screen. Batch number entry is provided.

Dissolution Testing

Versions of the instruments fitted with an 8 cell changer, special piping port and lid, are available for dissolution testing using Cecil TD software and a PC.