Learning Center
A Complete Glossary of Ultrasonic Cleaning Terms
Understanding the terminology used in ultrasonic cleaning is essential for maximizing the efficiency and effectiveness of your cleaning processes. This glossary provides definitions for key terms related to ultrasonic technology, cleaning solutions, equipment components, and common applications. Whether you're a seasoned professional or new to the field, this resource will help you navigate the language of ultrasonic cleaning and make informed decisions about your cleaning needs.
Cavitation
Formation of tiny bubbles in a liquid as a result of high-frequency sound waves.
Degas mode
On/off cycling of ultrasonic power to rapidly remove dissolved gas from a freshly filled bath. If not removed, dissolved gas will inhibit ultrasonic cleaning.
Dynamic mode
Alternates between Sweep mode and Pulse mode providing the benefits of both modes: uniform high-intensity cleaning.
Eco mode
Low-intensity Sweep mode for gentle cleaning of delicate objects. Operating in this mode extends the tank lifetime.
Foil test
A simple qualitative method using aluminum foil to test performance of an ultrasonic cleaner. The foil is suspended in the tank, the ultrasonic power is activated for a short period, and the foil is examined for a ‘pin prick’ pattern.
Pulse mode
Modulates ultrasonic power to produce intermittent sharp spikes. Operating in this mode increases cleaning and mixing intensity.
Sweep mode
Continuous small variation of the ultrasonic frequency above and below a central frequency. Sweep enhances the cleaning uniformity within a tank.
Transducer
A device that converts electrical energy into mechanical energy in the form of sound waves. Electrical energy from a generator causes the transducer to vibrate.
Ultrasonic frequency
Sound waves in an ultrasonic tank are produced by the rapid vibration of transducers bonded to the tank. The number of vibrations per second is the ultrasonic frequency. Ultrasonic frequency determines the cavitation bubble size. Higher frequency produces smaller bubbles. The amount of energy released by the collapsing bubble is directly related to the bubble size. Smaller bubbles release less energy.
Ultrasonic power
Ultrasonic power, normally expressed in watts, is the output power of an ultrasonic generator which delivers electrical energy to the transducers. The relationship between ultrasonic power and ultrasonic cleaning intensity is complicated; higher generator output power does not always translate to more powerful cleaning.
Wier and Spray Bar
A weir is an overflow section built into an ultrasonic tank. A spray bar is a perforated tube that directs a spray of cleaning solution across the surface of the liquid towards the weir. The combination of weir and spray bar removes oil floating on the liquid surface.
Have questions about ultrasonic cleaning?
Tell us about your parts, soils, and throughput, and we will recommend the right equipment, accessories, and resources.
Contact us