Firearms; rifles; pistols; aluminum parts
Powder residue; bullet shavings; hardened lubricants
Ultrasonic Power Corporation
Our gun cleaning and lubricating solutions are used by law enforcement and military personnel throughout the United States and abroad.
For high throughput gun cleaning using one ultrasonic tank for cleaning and a second for lubricating is most efficient. GunClean L6 ultrasonic firearm cleaner can be prepared in the first ultrasonic cleaner following the instructions on the container. Place disassembled metal parts in the cleaning basket and immerse them in the solution. At the conclusion of the cycle rinse the parts in fresh water and drain. Transfer parts to the second ultrasonic cleaner containing the blended ready-to-use GunLube L5 lubricating solution for a 10-12 minute cycle that removes all traces of water and leaves the firearm looking and feeling like brand new. Wipe any excess lubricant from weapons before reassembly. For low volume gun cleaning an auxiliary pan can be used in place of the second tank. The lubricating solution is placed in the auxiliary pan that is lowered into the cleaning tank so that the bottom of the pan is in contact with the cleaning solution. Ultrasonic cavitation will penetrate the pan and complete the lubricating step.
We'll help you select the right gun cleaning kit to get the highest productivity possible from your gun cleaner kit investment.
pH class: alkaline. Handling: emulsifying.
Use 10%- 10% depending on soil load.
Firearms; rifles; pistols; aluminum parts
Powder residue; bullet shavings; hardened lubricants
| Product line | GunClean L6 |
|---|---|
| Package size | 1Gal |
| pH class | alkaline |
| Handling | emulsifying |
| Typical dilution | 10% |
| Parts/materials | Firearms; rifles; pistols; aluminum parts |
| Soils removed | Powder residue; bullet shavings; hardened lubricants |
Tell us your parts material, soils, and process requirements. We'll match you with the right chemistry for your ultrasonic cleaner.