Our strong industrial ultrasonic cleaners come in a variety of volumes with varied feature sets. They are best for cleaning larger objects or a large quantity of smaller objects. Industrial tanks are designed for all-day operation.
Pick based on part or batch size, need for solution filtration, and cleaning liquid type.
Portable 25/45 kHz floor units for coarse to fine cleaning.
37 kHz Power House for uniform industrial cleaning.
Shiraclean precision cleaning solutions for production environments and maintenance departments.
For low flash point solvents like IPA or acetone
Built to your specs when parts are too large or workflows need automation.
Remove oils, chips, and polishing compounds from complex parts before assembly.
Clean injectors, carburetors, transmission components, and reman parts.
Flux removal and board cleaning with controlled cavitation and filtration.
Strip oils, resins, and support materials; keep molds and tooling in spec.
For small batches where a benchtop model is sufficient, use Xtra or xtra TT benchtop. For large parts or large batches use xtra ST portable floor models with optional particle filtration. Where both particle filtration and oil skimming are needed, use Shiraclean. For cleaning with volatile solvents, use SOL XP.
Your largest part should fit inside the basket and be completely submerged in the liquid. For batches, size for throughput. For Shiraclean models, large parts can rest on the bottom rack inside the tank, should not contact the inside walls, and should have a height less than the working depth of the tank.
Xtra benchtop handles up to 6 hours of continuous operation; xtra TT and xtra ST handle up to 8 hours/day or single shift operation; Shiraclean is built for daily industrial duty.
Use SOL XP, which is explosion proof and NRTL certified. Standard aqueous units must not be used with solvents that have flash points.
For removal of particulates, add filtration to an xtra ST tank or choose Shiraclean to extend bath life and maintain performance.
A weir is a skimming ledge leading to an additional tank or section. A spray bar is used to push liquid on the surface of the main ultrasonic tank over the ledge. This removes oil floating on the surface of the cleaning solution. Floating oil that comes off oily parts can recoat the parts when they are removed from the tank. A weir and spray bar keep the liquid surface free of oil and are helpful when cleaning oily parts.
Elma industrial tanks carry up to a 3-year tank warranty (xtra TT, Xtra, and xtra ST); SOL XP units carry a 1-year warranty; transducers carry 10 years. Our team supports sizing, installation, and service.
Tell us what you’re trying to accomplish: type of parts, size of largest part, and contaminants to be removed. We will match the right tank, basket, solution, and accessories.
Tell us your parts, soils, solvent, duty cycle, and cleanliness targets. We will match the right tank, basket, filtration, and safety package.
Tell us your part dimensions, contamination, throughput, and any chemistry constraints. We'll match the right tank, basket, and solution.
Benchtop units built for heavier-duty cleaning with reinforced tanks.
Elmasonic xtra TT tabletop units rated for extended duty cycles in industrial labs.
Elmasonic xtra ST floor-standing systems built for heavy-duty industrial cleaning with high power.
Explosion-proof units with NRTL certification for use with flammable solvents.
Shiraclean precision cleaning solutions for regulated labs and production environments.
